• <noscript id="gy2ci"></noscript>
  • <rt id="gy2ci"><center id="gy2ci"></center></rt>
  • <td id="gy2ci"><kbd id="gy2ci"></kbd></td>
    <li id="gy2ci"><wbr id="gy2ci"></wbr></li>
  • <menu id="gy2ci"></menu>
  • <small id="gy2ci"><bdo id="gy2ci"></bdo></small>

    Follows Us On : Product1 Product2 Product3


    38 Kuixing Avenue, Dongsheng Town, Zhongshan City, Guangdong Province, China


    8:00 am - 5:30 pm




    Industry News

    Home >>Industry News

    Current:Industry News

    Diamond saw blade

    Release Time:2023-04-27 09:31:48

    (4) grinding force effect, temperature effect and damage

    Diamond circular saw blade in the process of cutting stone, will be affected by centrifugal force, sawing force, cutting heat, etc. The effect of cyclic loading. Due to force effect and temperature effect of diamond circular saw blade grinding damage.

    Force effect: in the process of sawing, saw blade by the effect of axial force and tangential force. Due to the action in the circumferential direction and the radial force, make the saw blade in axial wave shaped, the radial disk. Both deformation caused by rock section is not flat, stone material waste, noise and vibration when cutting more intensified, which reduces the diamond agglomerate early damage and blade life.

    Temperature effect: traditional theory is that: the influence of temperature on the saw blade process is mainly manifested in two aspects: one is diamond graphitization of agglomeration of; 2 it is Wilson of diamond and matrix thermal force premature loss caused by diamond grains. New research shows that: in the process of cutting the heat generated by the main incoming agglomerate. Arc temperature is not high, generally between 40 ~ 120 ℃. And the abrasive grinding temperature is higher, generally between 250 ~ 700 ℃. Only reduce the arc area and coolant average temperature, the impact on the particle temperature is small. That not make the graphite carbonization temperature, however, can make the friction between abrasive grain and workpiece properties change, and thermal stress occurred between diamond and additives, and to have led to the failure mechanism of diamond radically bending. Research shows that temperature effect is the biggest influence factor to saw blade damage.

    Effect of grinding damage: due to the force and temperature is should, saw blades after a period of use tend to generate ground broken. Grinding damage form basically has the following kinds: abrasive wear, fragmentations, large crushing, fall off, binder along the direction of the cutting speed mechanical abrasion. Abrasive wear: diamond particles with a constant friction, edge passivation into plane, loss of cutting performance, increase the friction. Cutting heat can make the diamond particle surface graphitization thin layer, the hardness is greatly reduced, increase the wear: diamond particles surface under alternating thermal stress, as well as cutting under alternating stress, fatigue cracks will occur and local breakage and show new sharp edge, is the ideal wear form; Large crushing: diamond particles under impact load, when cut to cut out the prominent particle and grain early to consume; Loss: alternating cutting force makes the diamond grains in the binder was shaking and loose. At the same time, the bond itself in the process of cutting wear and cutting heat to soften binder. That makes the holding of the binder force decreased, when the cutting force is greater than the holding force on the particles, the diamond particles will fall off. No matter which kind of wear and tear with diamond grains on the load and temperature are closely related. And both depends on Cheng cutting process and the cooling lubrication conditions.


    (5) diamond saw blade manufacturing methods

    With the rapid development of automobile, aviation and space technology, higher requirements on the material properties and the processing technology. New materials such as carbon fiber reinforced plastic, particle reinforced metal matrix composites (PRMMC) and ceramic materials widely used. The material has high strength, good abrasion resistance, and the characteristics of small thermal expansion coefficient, which determine the machining on them when the cutting tool's life is very short. Development of new type of wear-resisting and stable superhard cutting tool is that many colleges and universities, research institutes and enterprise research topic. Diamond collection of mechanics, optics, thermology, acoustics, optics, and many other excellent performance, high hardness, low friction coefficient, high thermal conductivity, low thermal expansion coefficient and chemical inertness, is an ideal material to manufacture cutting tools.


    Range of application

    (1) difficult processing non-ferrous metal materials processing. Processing of copper, zinc, aluminum and other non-ferrous metals and their alloys, materials easy adhesion cutting tools, processing difficult. Using diamond low friction coefficient, low affinity and non-ferrous metal, the characteristics of diamond tool which can effectively prevent metal bonding with knives. In addition, because of the large diamond modulus of elasticity, when the cutting blade is small deformation, on the cutting non-ferrous metal extrusion deformation is small, it can complete cutting process under small deformation, and thus can improve the machining surface quality.

    (2) the hard processing of non-metallic materials processing. Contains a large amount of high hardness particle difficult machining non-metallic materials, such as glass fiber reinforced plastic, silicon, hard carbon fiber/epoxy resin composite material, the hard point of material to make the tool wear serious, with carbide cutting tools are difficult to machining, and the diamond tool high hardness, good wear resistance, so the machining efficiency is high.

    (3) the ultra precision machining. With the advent of modern integration technology, machining to develop in the direction of high precision, and puts forward very high requirements on tool performance. Because the diamond small friction coefficient, low thermal expansion coefficient, high thermal conductivity, can cut a very thin chip, chip flow, easily with other substances affinity is small, not easy to produce the devolop tumor, calorific value is small, high thermal conductivity, can avoid heat influence on the blade and artifacts, so the blade is not easy to passivation, cutting deformation is small, high quality surface can be obtained.

    Next:There is no next one!

    Address: city of zhongshan, guangdong province, China kwai hing road 38

    Fax: 0760-22187859

    Telephone: 0760-22187858


    圖一 圖二 圖三 圖四

    Mindong Film Technology Co., Ltd  .Diego German precision cutting tool co., LTD All Rights Reserved

    網站ICP備案號: 粵ICP備11073189號

    Multi terminal browsing

    Multi terminal browsing


    Goke German Precision Tool Co., LTD. Address: No. 38, Kuixing Avenue, Dongsheng Town, Zhongshan City, Guangdong Province, China Postcode: 528400 Tel: 0760-22187858 Fax: 0760-22187859

    一卡二卡三卡四卡视频版在线观看,亚洲不卡一卡2卡三卡4卡5卡中文字幕,欧洲一卡2卡3卡四卡网站,成片一卡二卡三卡四卡图片,一本二卡三卡四卡乱码 精品一卡2卡3卡4卡免费观看| 成片一卡二卡3卡4卡网站| 国产亚洲丝袜无码一区二区三区视频| 精品一卡2卡3卡4卡5卡视频| 欧美日韩一卡2卡三卡4卡乱码理论| 国产亚洲1卡二卡三卡4卡| 成片一卡2卡3卡4卡乱码在线| 成片一本到卡二卡三卡免费乱码| 精品一卡2卡3卡4卡新区| 国产亚洲一卡2卡三卡4卡2021国色| 国产亚洲一卡2卡3卡四卡国色天香| 精品一卡2卡3卡4卡5卡视频| 国产亚洲2021卡一卡二乱码| 欧洲一卡二卡3卡四卡| 欧洲一卡2卡3卡4卡国色天香| 国产亚洲一卡2卡3卡4卡国色天香九零| 欧洲一卡2卡3卡四卡国色天香| 欧美日韩2018一卡2卡3卡4卡网站| 成片一卡二卡三卡| 成片一卡二卡三新区入口| 国产亚洲卡1卡2卡三卡免费网站| 精品2021一卡2卡三卡4卡乱码不卡| 精品一本到卡二卡三卡免费乱码| 国产亚洲卡1卡2卡三卡2021| 欧洲一卡2卡3卡4卡免费观看| 精品一卡二卡≡卡四卡免费视频| 欧洲一本二卡三卡四卡乱码| 欧美日韩一卡2卡三卡4卡 乱码| 精品一卡2卡3卡4卡免费观看| 精品一卡二卡3卡4卡| 国产亚洲一卡2卡三卡4卡乱码理论| 欧洲一卡2卡3卡4卡2021乱码在线观看| 精品一卡2卡三卡4卡棋牌| 欧洲一卡二卡≡卡四卡免费视频| 国产亚洲一卡2卡3卡4卡| 欧美日韩2021一卡2卡3卡4卡| 国产亚洲一卡二卡三卡| 欧洲不卡二卡三卡四卡免费| 国产亚洲一卡二卡≡卡四卡高清乱码| 国产亚洲卡一卡2卡3卡4卡在线观看| 欧美日韩2021卡一卡二卡三| 欧美日韩一卡二卡3卡四卡| 欧洲一卡二卡3卡4卡| 欧美日韩不卡一卡2卡三卡4卡5卡| 精品一卡2卡三卡4卡乱码毛1| 成片一卡2卡3卡4卡5卡在线| 欧美日韩一卡二卡3卡4卡网站| 精品一卡二卡三乱码免费天美传媒在线| 欧洲一卡二卡≡卡四卡高清乱码| 成片一卡2卡3卡4卡乱码网站导航| 成片乱子伦一区二区三区| 成片2021卡一卡二卡三| 欧美日韩一卡2卡3卡四卡网站| 成片卡一卡2卡3卡4卡在线观看| 欧美日韩卡一卡二卡三新区| 成片一本到卡二卡三卡免费乱码| 成片一卡2卡3卡4卡2021乱码在线观看|